GacoFlex N-17

GacoFlex N-17 Series neoprene coatings are single component, air curing, liquid coatings designed to be used interchangeably and to yield elastomeric films of high physical characteristics.

---

USAGE

Intended as a maintenance coating for outstanding resistance to most chemical fumes and minor contact from spills. Not intended for immersion duty. Neoprene coatings also provide durable waterproofing for inflatable rafts.

CONSISTENCY

Heavy bodied, but readily roller coated or brushed

COLOR

• N-1711 Gray
• N-1721 Black
• N-1730 Aluminum

---

APPLIED PRODUCT DATA

WEATHERABILITY

Aluminum and Black have good weatherability. Gray must be top coated when exposed to the sun.

CHEMICAL RESISTANCE

Excellent resistance to salts; good resistance to alkalis, non-oxidizing acids, gasoline spillage, lubricating oil; poor resistance to aromatic and oxygenated solvents.

TENSILE

• ASTM D-412-80
• Strength: 1000 psi (6.9 MPa)
• Elongation: 300% min.
• Permanent Set at Break: 25% max.

HARDNESS, CURED

• ASTM D-2240
• Exceeds 85 Shore A

WATER ABSORPTION

• ASTM D-471
• 4.0% max

WATER VAPOR PERMEABILITY

• ASTM E-96
• Method B, 100% R.H. Difference
• 7 days at room temperature
• 0.002 Perm Inches Max (.1mm)

---

PACKAGED PRODUCT DATA

COVERAGE

• Black: 367 Sq. Ft./Gal./Mil., 9 m² / L / .025 mm
• Aluminum: 327 Sq. Ft./Gal./Mil., 8 m² / L / .025 mm
• Gray: 346 Sq. Ft./Gal./Mil., 8.5 m² / L / .025 mm

SOLID Weight

• Method 4041
• Fed. Std. 141
• Black: 34.9%
• Aluminum: 30.2%
• Gray: 36.6%

SOLID Volume

• Black: 22.9%
• Aluminum: 20.4%
• Gray: 21.7%

V.O.C.

V.O.C. is approximately 662 grams per liter, for N-1711 and N-1721. V.O.C. is 671 grams per liter for N-1730.

TOXICITY

Contains solvents which require normal precautions in handling materials of this type. The product label includes handling instructions. Non-toxic in applied film. Not for use in contact with edibles or potable water due to slight taste transfer.

FLASH POINT

• ASTM D-56
• 45°F (7°C) T.C.C.

ADHESION

• ASTM D-903
• 20 lbs. min./inch (3.6 kg / cm) width with appropriate primer.

STORAGE STABILITY

One year from date of manufacture in sealed container when stored below 75°F (24°C).

THINNER AND CLEANER

T-5112 Regular or T-5111 Fast

---

APPLICATION

Apply by brush or roller in thickness of 16-24 wet mils (.4 to .6mm). Can be thinned for cold weather, hot weather, or application to rough or porous substrates. Dries at 70°F (21°C) in 3-4 hours. Can be recoated when firm to touch. Use the Gaco Western primer E-5320 for steel, non-ferrous surfaces, concrete and masonry.